Pool heater cost breaks down like this: $3,500 to $7,000 installed for gas, $4,000 to $7,500 for a heat pump, $3,000 to $8,000 for solar. Running cost is where they separate — roughly $5 to $8 an hour for gas, under a dollar an hour for a heat pump, and nothing at all for solar.
Which means the sticker price is almost the least interesting number here. You are choosing an operating cost you will live with for a decade, and most people pick the heater based on the install quote and then get surprised by a gas bill in April.
The three real options
| Gas | Heat pump | Solar | |
|---|---|---|---|
| Installed cost | $3,500–$7,000 | $4,000–$7,500 | $3,000–$8,000 |
| Running cost per hour | $5–$8 natural gas, $11–$15 propane | $0.60–$0.90 | $0 |
| Heats a 20k gal pool 10°F in | 5–6 hours | 13–18 hours | Days, weather-dependent |
| Works when air is cold | Yes, any temperature | Poorly below about 50°F | No |
| Lifespan | 7–12 years | 10–15 years | 15–20 years |
| Best for | Occasional, on-demand heat | Holding a temperature all season | Free extra degrees in shoulder season |
The math behind those numbers
It is worth seeing, because it explains everything about how these things behave.
One BTU raises one pound of water one degree. A 20,000 gallon pool weighs about 166,800 pounds, so a 10-degree rise takes roughly 1.67 million BTU. A 400,000 BTU gas heater running at around 80 percent thermal efficiency delivers about 320,000 BTU an hour, so it gets there in five to six hours of burn. A 125,000 BTU heat pump delivers what it says, and takes thirteen-plus hours.
That difference is not a flaw. It is the whole design philosophy. Gas heaters are meant to be off, then fired up when guests are coming Saturday. Heat pumps are meant to be left on, sipping electricity, holding 86 degrees from March through November.
Pick the one that matches how you will actually behave, not how you imagine you will behave.
Sizing: the rule and the reason
The working formula is pool surface area in square feet, times the temperature rise you want, times 12 — that gives BTU per hour to get there in roughly 24 hours.
A 16x32 pool is 512 square feet. Want 20 degrees of rise? 512 × 20 × 12 = about 123,000 BTU/hr for a full-day heat-up, and you would size a gas heater considerably above that for faster recovery.
Undersizing is the more common mistake, and it is the expensive one, because an undersized heater runs constantly and never quite gets there. Oversizing a gas heater costs more up front and almost nothing to operate — it just runs less often.
The retrofit costs nobody quotes on the phone
Adding a heater to an existing pool is where budgets slip:
- Gas line sizing. A 400,000 BTU heater is a serious appliance. Existing three-quarter inch lines often cannot feed it at the required pressure, and running a properly sized line can add $500 to $2,000.
- Electrical. Heat pumps need a dedicated circuit, typically 40 to 60 amps, plus bonding per the National Electrical Code. A panel that is already full adds cost fast.
- Plumbing and pad space. Some equipment pads have room, some need reworking.
- Roof structure for solar. Panels need roof area roughly half to equal your pool's surface area, facing the right way, and the roof has to be in good enough shape to justify mounting on.
Get all of that on the written quote. A heater price without the gas and electrical scope is not a quote, it is an opening bid.
Our actual recommendation
If you swim regularly and want a long season, get the heat pump. In a climate like the Coastal Bend's, where air temperatures stay warm enough for a heat pump to work efficiently through most of the shoulder season, the running-cost gap is enormous — a full season of heat pump operation often costs less than a month of aggressive gas heating. Over a 12-year life that difference dwarfs the install price.
Get gas only if you heat occasionally and need it now. A vacation home, a pool used for parties, a spa you want hot in 30 minutes. That is a legitimate use case and heat pumps are genuinely bad at it.
Get solar if you have the roof and want the shoulder season for free. It typically adds 10 to 15 degrees over ambient during sunny months, costs nothing to run, and is the only option here with no operating cost at all. It just cannot deliver a number on demand.
When you should not buy a heater at all
Honestly, a lot of people in warm markets do not need one.
If your pool sits in full sun and you only swim June through August, buy a solar cover instead. A $150 to $400 cover will hold heat overnight and add several degrees on its own, and evaporation — which the U.S. Department of Energy identifies as the largest single source of pool heat loss — mostly stops while it is on. Try that for one season before spending $6,000.
If your pool is heavily shaded, do the tree work before the heater. Four hours of direct sun is worth more than a heater running against a shaded pool that loses it all back overnight.
The failure we see most
Heat exchangers eaten by low pH. A gas heater's exchanger is copper, and water that sits below 7.2 pH for months is corrosive to it. The heater runs fine, then one spring it does not, and the exchanger is a $700 to $1,400 part on a unit that might not be worth it.
The prevention is boring: keep pH at 7.4 to 7.6 and calcium hardness at 200 to 400 ppm. Same chemistry that protects your plaster protects your heater. This is one of the practical reasons a weekly service plan pays for itself on pools with expensive equipment.
Corpus Christi Pool Pros installs and repairs pool heaters and equipment across Corpus Christi and the Coastal Bend, gas and heat pump, on new builds and retrofits. We will also tell you if a cover solves your problem for $200. For the rest of the running-cost picture, see our monthly pool maintenance cost breakdown, or call (844) 511-2320.
Get a free quote → · call (844) 511-2320
Ready for a free quote in Corpus Christi?
Corpus Christi Pool Pros — free estimate, clear scope, no pressure. Use the form on this page or jump to the homepage quote.
Related services in Corpus Christi
Corpus Christi Pool Pros money pages — go straight to the service you need.
- Pool Remodeling & Renovation →
Pool remodeling in Corpus Christi usually costs between a quarter and half of what a new pool does, because the expensive part, the shell in the ground, is almost always still sound. What has aged out is everything you actually touch and look at: the plaster, the tile, the coping, the deck, and equipment that belongs in a museum.
- Spa & Hot Tub Installation →
Spa and hot tub installation in Corpus Christi gives you the part of the backyard that gets used from November through March, when the pool itself is honestly too cool to enjoy. A raised gunite spa that spills into the pool is the most common build we do, and building it at the same time as the pool costs far less than adding one later because it shares filtration, heater, gas line, and automation.
- Pool Heaters & Heat Pumps →
Pool heater installation in Corpus Christi turns a three-season pool into a year-round one, because water temperature in December sits well below comfortable even on days when the air feels fine. We install and service natural gas and propane heaters, electric heat pumps, and solar systems, and the right choice depends entirely on whether you want fast heat or cheap heat.
- Weekly Pool Cleaning & Maintenance →
Weekly pool service in Corpus Christi runs $100 to $250 a month depending on pool size, tree load, and whether filter cleans and salt cell service are included. A proper visit is not a lap around the pool with a net: we test and balance the water, brush walls and the waterline, empty skimmer and pump baskets, check filter pressure against its clean baseline, inspect the equipment pad, and leave a note about anything trending the wrong way.
- Gunite & Shotcrete Pool Construction →
Gunite pool construction in Corpus Christi gives you a steel-reinforced concrete shell that can take any shape your lot allows and shrug off Gulf Coast salt air for decades. We handle the whole build in house: 3D design, permits, excavation, rebar, shotcrete, tile, coping, decking, equipment, and plaster startup.
Frequently asked questions
How much does it cost to install a pool heater?
Gas heaters run $3,500 to $7,000 installed, heat pumps $4,000 to $7,500, and solar systems $3,000 to $8,000. Retrofits on an existing pool cost more than heaters installed during construction, mostly because of gas line sizing and electrical work.
What is cheaper to run, a gas pool heater or a heat pump?
A heat pump, by a wide margin. A 400,000 BTU natural gas heater burns about 4 therms an hour, roughly $5 to $8. A heat pump doing the same job pulls about 5 kilowatts, roughly $0.60 to $0.90 an hour. Gas buys you speed; the heat pump buys you a cheaper season.
How long does it take to heat a pool?
Depends on the heater. A 400,000 BTU gas heater raises a 20,000 gallon pool about 10 degrees in five to six hours. A 125,000 BTU heat pump takes 13 to 18 hours for the same rise, which is why heat pumps are run continuously to hold a temperature rather than fired up for a weekend.
Do I need a pool heater in the Coastal Bend?
Often not for the peak of summer. What a heater actually buys most owners here is April, May, October, and sometimes November — two to three extra months of swimming. If you only ever swim in July, a solar cover for $150 will do.
How long do pool heaters last?
Gas heaters typically last 7 to 12 years, heat pumps 10 to 15, and solar panels 15 to 20. Water chemistry shortens all three. Low pH is what eats gas heater heat exchangers, and it is the most common cause of an early failure we see.
Does a pool cover really help with heating?
More than any equipment upgrade. Evaporation is the single largest source of heat loss from a pool, and the U.S. Department of Energy identifies covers as the most effective way to cut pool heating costs. A cover costs a few hundred dollars and does more per dollar than anything on your equipment pad.
Local context
How this applies in Corpus Christi, TX
Every article here is written from pool work done in Corpus Christi and the Coastal Bend, so the numbers reflect local labour, permit and material costs rather than a national average. Your own job can land either side of them depending on access, the condition of what is already there, and the materials you pick — gunite and shotcrete shells, fiberglass pool shells, pebble, mini-pebble and quartz interior finishes.
The way to turn any of this into a real answer is to have someone look at your actual situation. The free estimate is free, itemized and written down, with no deposit and no obligation. Call (844) 511-2320 or start on the Corpus Christi Pool Pros homepage.
Areas Corpus Christi Pool Pros covers
Corpus Christi first, then the surrounding communities of the Coastal Bend. Each has its own page with local detail rather than a copy of this one:
- Portland, TX — San Patricio County, population 20,700
- Robstown, TX — Nueces County, population 11,000
- Aransas Pass, TX — San Patricio County, population 8,200
- Ingleside, TX — San Patricio County, population 9,600
- Rockport, TX — Aransas County, population 10,700
- Fulton, TX — Aransas County, population 1,600
Or jump to the full list of Corpus Christi services.
The Corpus Christi Pool Pros Team
Licensed pool pros in Corpus Christi, TX
Written by the Corpus Christi Pool Pros team — licensed, insured pool pros with 15+ years serving Corpus Christi, TX and the surrounding area.